Public

If the given result is different to cublasStatus.CUBLAS_STATUS_SUCCESS and
exceptions have been enab

checkResult

Obtain the current CUBLAS status by calling cublasGetErrorNative, and store the
result as the lastRe

checkResultBLAS

cublasAllocNative

cublasCaxpyNative

cublasCcopyNative

cublasCdotcNative

cublasCdotuNative

cublasCgbmvNative

cublasCgemmNative

cublasCgemvNative

cublasCgercNative

cublasCgeruNative

cublasChbmvNative

cublasChemmNative

cublasChemvNative

cublasCher2Native

cublasCher2kNative

cublasCherNative

cublasCherkNative

cublasChpr2Native

Parsing JSON documents to java classes using gson

The Color class is used to encapsulate colors in the default sRGB color space or
colors in arbitrary

java.awt.Color

A readable source of bytes.Most clients will use input streams that read data
from the file system (

java.io.InputStream

A charset is a named mapping between Unicode characters and byte sequences.
Every Charset can decode

java.nio.charset.Charset

This class contains various methods for manipulating arrays (such as sorting and
searching). This cl

java.util.Arrays

SortedSet is a Set which iterates over its elements in a sorted order. The order
is determined eithe

java.util.SortedSet

General file manipulation utilities. Facilities are provided in the following
areas: * writing to a 

org.apache.commons.io.FileUtils

requestLocationUpdates

setRequestProperty

putExtra

/**
     * <pre>
     * void
     * cublasZtrsv (char uplo, char trans, char diag, int n, const cuDoubleComplex *A,
     *              int lda, cuDoubleComplex *x, int incx)
     *
     * solves a system of equations op(A) * x = b, where op(A) is either A,
     * transpose(A) or conjugate(transpose(A)). b and x are double precision
     * complex vectors consisting of n elements, and A is an n x n matrix
     * composed of a unit or non-unit, upper or lower triangular matrix.
     * Matrix A is stored in column major format, and lda is the leading
     * dimension of the two-dimensional array containing A.
     *
     * No test for singularity or near-singularity is included in this function.
     * Such tests must be performed before calling this function.
     *
     * Input
     * -----
     * uplo   specifies whether the matrix data is stored in the upper or the
     *        lower triangular part of array A. If uplo = 'U' or 'u', then only
     *        the upper triangular part of A may be referenced. If uplo = 'L' or
     *        'l', then only the lower triangular part of A may be referenced.
     * trans  specifies op(A). If transa = 'n' or 'N', op(A) = A. If transa = 't',
     *        'T', 'c', or 'C', op(A) = transpose(A)
     * diag   specifies whether or not A is a unit triangular matrix like so:
     *        if diag = 'U' or 'u', A is assumed to be unit triangular. If
     *        diag = 'N' or 'n', then A is not assumed to be unit triangular.
     * n      specifies the number of rows and columns of the matrix A. It
     *        must be at least 0.
     * A      is a double precision complex array of dimensions (lda, n). If uplo = 'U'
     *        or 'u', then A must contains the upper triangular part of a symmetric
     *        matrix, and the strictly lower triangular parts is not referenced.
     *        If uplo = 'L' or 'l', then A contains the lower triangular part of
     *        a symmetric matrix, and the strictly upper triangular part is not
     *        referenced.
     * lda    is the leading dimension of the two-dimensional array containing A.
     *        lda must be at least max(1, n).
     * x      double precision complex array of length at least (1 + (n - 1) * abs(incx)).
     *        On entry, x contains the n element right-hand side vector b. On exit,
     *        it is overwritten with the solution vector x.
     * incx   specifies the storage spacing between elements of x. incx must not
     *        be zero.
     *
     * Output
     * ------
     * x      updated to contain the solution vector x that solves op(A) * x = b.
     *
     * Reference: http://www.netlib.org/blas/ztrsv.f
     *
     * Error status for this function can be retrieved via cublasGetError().
     *
     * Error Status
     * ------------
     * CUBLAS_STATUS_NOT_INITIALIZED  if CUBLAS library has not been initialized
     * CUBLAS_STATUS_INVALID_VALUE    if incx == 0 or if n < 0
     * CUBLAS_STATUS_ARCH_MISMATCH    if invoked on device without DP support
     * CUBLAS_STATUS_EXECUTION_FAILED if function failed to launch on GPU
     * </pre>
     */

/**
   * <pre>
   * void 
   * cublasZtrsv (char uplo, char trans, char diag, int n, const cuDoubleComplex *A, 
   *              int lda, cuDoubleComplex *x, int incx)
   *
   * solves a system of equations op(A) * x = b, where op(A) is either A,  
   * transpose(A) or conjugate(transpose(A)). b and x are double precision 
   * complex vectors consisting of n elements, and A is an n x n matrix 
   * composed of a unit or non-unit, upper or lower triangular matrix.
   * Matrix A is stored in column major format, and lda is the leading 
   * dimension of the two-dimensional array containing A.
   *
   * No test for singularity or near-singularity is included in this function. 
   * Such tests must be performed before calling this function.
   *
   * Input
   * -----
   * uplo   specifies whether the matrix data is stored in the upper or the 
   *        lower triangular part of array A. If uplo = 'U' or 'u', then only 
   *        the upper triangular part of A may be referenced. If uplo = 'L' or 
   *        'l', then only the lower triangular part of A may be referenced.
   * trans  specifies op(A). If transa = 'n' or 'N', op(A) = A. If transa = 't',
   *        'T', 'c', or 'C', op(A) = transpose(A)
   * diag   specifies whether or not A is a unit triangular matrix like so:
   *        if diag = 'U' or 'u', A is assumed to be unit triangular. If 
   *        diag = 'N' or 'n', then A is not assumed to be unit triangular.
   * n      specifies the number of rows and columns of the matrix A. It
   *        must be at least 0. 
   * A      is a double precision complex array of dimensions (lda, n). If uplo = 'U' 
   *        or 'u', then A must contains the upper triangular part of a symmetric
   *        matrix, and the strictly lower triangular parts is not referenced. 
   *        If uplo = 'L' or 'l', then A contains the lower triangular part of 
   *        a symmetric matrix, and the strictly upper triangular part is not 
   *        referenced. 
   * lda    is the leading dimension of the two-dimensional array containing A.
   *        lda must be at least max(1, n).
   * x      double precision complex array of length at least (1 + (n - 1) * abs(incx)).
   *        On entry, x contains the n element right-hand side vector b. On exit,
   *        it is overwritten with the solution vector x.
   * incx   specifies the storage spacing between elements of x. incx must not 
   *        be zero.
   *
   * Output
   * ------
   * x      updated to contain the solution vector x that solves op(A) * x = b.
   *
   * Reference: http://www.netlib.org/blas/ztrsv.f
   *
   * Error status for this function can be retrieved via cublasGetError().
   *
   * Error Status
   * ------------
   * CUBLAS_STATUS_NOT_INITIALIZED  if CUBLAS library has not been initialized
   * CUBLAS_STATUS_INVALID_VALUE    if incx == 0 or if n < 0
   * CUBLAS_STATUS_ARCH_MISMATCH    if invoked on device without DP support 
   * CUBLAS_STATUS_EXECUTION_FAILED if function failed to launch on GPU
   * </pre>
   */

How to use cublasZtrsvNativemethodin jcuda.jcublas.JCublas

Best Java code snippets using jcuda.jcublas.JCublas.cublasZtrsvNative (Showing top 6 results out of 315)

How to use
cublasZtrsvNative
method
in
jcuda.jcublas.JCublas